Installation Archives

Integrated End Panel Frame/Door for Inset Cabinets. This video demonstrates how to create and install inset frame/door panels on the ends of your cabinetry, carrying the …

fridaynightfunkin.ninja

View More ...

Measurement & Sketch Guide

Step 3: Start Measuring. Label every wall section, opening, and obstacle with a letter and create a legend with all of the letters from your drawing. Then, measure every wall area, opening, and obstacle that you labeled. Be sure to measure to the outside of any trim moldings. Now complete your legend, noting the dimension next to each letter.

cabinetjoint.com/measurements-sketch-guide/

View More ...

CONESTOGA CABINET ASSEMBLY INFORMATION

CONESTOGA CABINET ASSEMBLY INFORMATION We suggest you view the 4 minute assembly demonstration video on our web site to see how easily our high end custom cabinets are assembled. Before continuing, it is important to realize that Conestoga’s RTA cabinet is targeted at

cabinetjoint.com/wp-content/uploads/2012/11/ASSEMBLY_GUIDE.pdf

View More ...

RTA Cabinets Made in USA, Premium Ready to Assemble

RTA Cabinets Made in USA, Premium Ready to Assemble - Cabinet Joint. PREMIER RTA CABINETS. Save 20 to 40% off showroom and Big Box Store prices! Made in the USA, Custom Sizing at no charge & Unmatched Selection.

cabinetjoint.com/

View More ...

Joining Cabinets Through the Face Frame

August 3, 2020 at 12:13 pm. Yes, if you do not screw through the face frame to join cabinets together, the space between them can “grow” as wood movement occurs (humidity, etc). Plus, by joining the face frames, you are essentially spreading the strength of the install screws going into the wall across a run of cabinets vs just one.

cabinetjoint.com/video-library/installation-joining-cabinets-face-frame/

View More ...

Installation: Shimming Base Cabinets to Account for

Brian Long says: If you install the cabinets without shimming and then install floor up to it (and then into the DW and Fridge openings), you are closing down the space for the DW and fridge to slide in to. With thin vinyl plank flooring, this is less of an issue, but with hardwood floors, tile (with hardiboard underlayment) and some engineered

cabinetjoint.com/video-library/installation-shimming-base-cabinets-account-flooring/

View More ...

Adjusting Blum Tandem Drawer Glides

Loosen the screw that attaches the drawer glide to the mounting block. Then you can adjust the drawer track in and out to make the drawer front flush with the front frame. Once the slides are readjusted, tighten the screw and place the drawer box back on the glides. This video beginning at 10 min 25 sec shows this process.

cabinetjoint.com/video-library/adjusting-blum-tandem-drawer-glides/

View More ...

Blum Tandem Installation

Features New Pilot Holes. This video shows the full Blum Tandem installation for standard 18, 21 and 24 deep cabinets. We cover the installation of the brackets, glides, and handles for overlay and inset cabinets and also cover the new Pilot hole option (jig is discontinued). The Inset mounting bracket is also covered. To jump to a specific

cabinetjoint.com/video-library/blum-tandem-installation-overlay-inset-features-new-pilot-holes/

View More ...

How to Read Your Shipment Labels

Step 1: Identify a cabinet to build using the box label. First, identify a cabinet by looking at the box label (see Image 1 example below). The cabinet code is located on the right-hand side of the label just above the bar code. In this example, the cabinet is a B1834.5 (Base cabinet, 18 wide, 34.5 high). Remember, only your cabinets have a

cabinetjoint.com/how-to-read-your-product-labels/

View More ...

Base Cabinet Installation Tips

March 4, 2015 at 6:30 pm. Hey Gregg, Its really a matter of preference, but mine is to floor right up to the walls and then set the cabinets on top. If you choose to install cabinets first, you must know how high your flooring will be and elevate the cabinets by that amount. If you do not, when you floor in to your dishwasher, stove and fridge

cabinetjoint.com/video-library/installation-general-tips-base-cabinets/

View More ...

Installing Base Lazy Susan Trays

Melissa McElwee says: We suggest to get a smaller susan. The susan for the 33″ BLS will go in the opening for a BLS36 with no issues. Yes, you lose some rotary shelf space, but you will gain “shelf” space around the susan tray and in the back corner. We don’t think its worth butchering the existing cabinet/shelf to gain a few inches of

cabinetjoint.com/video-library/installing-base-lazy-susan-trays/

View More ...

Basics of Designing & Installing Blind Corner Cabinet

Brian Long says: Yes. All blind corner cabinets have an “open” blind area which you can cover with a piece of plywood if you are concerned about items falling into that space. What do the dimensions 45-48 on a blind corner cabinet indicate?

cabinetjoint.com/video-library/blind-corner-cabinet-basics/

View More ...

Installing Inset Hinges: Part 1- Measuring for the

2 thoughts on “ Installing Inset Hinges: Part 1- Measuring for the Brackets ”. For a wall face frame with just one door, there a top or a bottom to the face frame? Everything looks symmetrical but I want to be sure before installing the inset hinge brackets. No, you can flip as needed. Just remember that if there is an extended stile, there

cabinetjoint.com/video-library/installing-inset-hinges-part-1/

View More ...

Pull Out Filler Rack at End of a Cabinet Run

Pull Out Filler Rack at End of a Cabinet Run. This video is an update to our recent filler pull out video. It shows how these units CAN be used at the end of a cabinet run.

cabinetjoint.com/video-library/pull-fillers-end-cabinet-run/

View More ...

Measuring for Your New Cabinet Doors

Step 2: Create a List & Begin to Measure. Create a numbered list for all of the doors and drawer front openings in your photos. This helps us communicate with you about the items, and will help you install them correctly when they are delivered. Begin measuring your existing cabinet openings, noting width followed by height.

cabinetjoint.com/measuring-for-your-new-cabinet-doors/

View More ...

Mounting False Drawer Front on Sink or Range Base Cabinet

Theoretically, you could also screw the screws all the way into the handle until TIGHT and then cut the head off the screws. Pass the screw shafts through the holes in the drawer front and then attach with buts from the back side (you should be able to get a small socket on the nuts) Now, to be honest, the reason companies dont put hardware on

cabinetjoint.com/video-library/mounting-false-drawer-front-sink-base-cabinet/

View More ...

How To Assemble a Tall Cabinet in Upright Position

2 thoughts on “ Assembling a Tall Cabinet in Upright Position ”. Doc says: April 12, 2020 at 7:48 pm. Easier said than done. It helps to put 2×4 spacer on wall so panels can be clamped. If wall isn’t plumb or flat, it’s quite impossible to seat the side panels. Reply. James Inpyn says: April 15, 2020 at 2:27 pm.

cabinetjoint.com/video-library/6555/

View More ...

Installing Light Rail Molding

For general cabinet assembly, 1″ nails are typically fine to use since there is wood glue that is going to do most of the ‘holding’ work. For trim/molding installation, you’ll likely want to use longer nails, maybe 1-1/2″, just depends on the application. Have a great day!

cabinetjoint.com/video-library/installing-light-rail-molding/

View More ...

Installing Pull Out Trays (POT)

Hi Kim, This pull-out tray installation video is for overlay hinges only. When installing pull-out trays with inset hinges, you will need to modify the cleats that attach behind the face frame. You will cut a part of the cleat, containing one notched opening and attach it below the bottom hinge. The remaining cleat can go above the bottom hinge.

cabinetjoint.com/video-library/installing-pull-trays-pot/

View More ...

MDF (Medium Density Fiberboard) and When to Use It

MDF (medium Density Fiberboard) has been around for years and is a critical material use in the manufacturing of anything from cabinet doors to moldings and trim. Just like any material, MDF has its place in the mill work process. It has a great many attributes that make it more desirable than solid wood, but it may not be ideal for every

cabinetjoint.com/2016/12/mdf-medium-density-fiberboard-use/

View More ...

Custom Stain Color Matching

Please note, color matching program matches stains only with an option of 15° or 40° topcoat sheens. Cabinet Joint only accepts custom color jobs on full kitchen orders and we reserve the right to decline to match if we or Conestoga are not able to take it on based on volume. A $300 fee is charged to color match and refunded if we are unable

cabinetjoint.com/2020/08/custom-stain-color-matching/

View More ...

Create an Easy Door Mounting Jig For Base Cabinets

Connie VanLuchene says: For the 1/2” overlay cabinets I clamped a length of 1” aluminum angle to the bottom of the front frame level with the bottom edge to keep the door parallel to the bottom of the front frame and consistently 1” from the bottom edge. It works well with the cabinet lying on its back and also makes a nice “shelf” to

cabinetjoint.com/video-library/tip-create-easy-door-mounting-jig-base-cabinets/

View More ...

Pricing Ready to Assemble Cabinets

RTA Cabinet Pricing. We custom price each job to ensure accuracy for our customer. However, you can get approximate pricing using this page as a starting point. Conestoga’s built-to-order, American made cabinets are not meant to compete with imported cabinets. Compare against semi/fully custom cabinetry and you will find Conestoga to be 20-40

cabinetjoint.com/pricing/

View More ...

Installing Inset Hinges: Part 2

The back of the face frame is flat, but the brackets (engineered by Blum, not us) have a slight slope to the screw holes. If you rin the screw in straight up and down, the screw head will not sit squarely on the angled bracket face, causing the bracket to tilt due to the torque of the screw. Once you actually see the hinge bracket, you will see

cabinetjoint.com/video-library/installing-inset-hinges-part-2/

View More ...

Inset Cabinetry Archives

BEADED INSET Base Lazy Susan Front Frame Trimming. How to trim the front frames on a beaded inset BLS so that the beads meet cleanly in the corner. Blum Tandem Installation – Overlay and Inset. Features New Pilot Holes. This video shows the full Blum …

cabinetjoint.com/video-category/inset-cabinetry/

View More ...

Finished Wall Cabinet Bottoms

Brian Long says: January 30, 2020 at 9:47 am. Yes, it can, it’s just a piece of plywood and some light rail molding. It is typical to do this after install anyway so that you don’t have seams where the plywood meets under the wall cabinets, you can do it in longer sheets. One of our Cabinet Coaches would be happy to walk you through the

cabinetjoint.com/video-library/finished-wall-cabinet-bottoms/

View More ...

Removing a Front Frame From an Assembled

James Inpyn says: Hey Bradley, Thank you for your comment. Getting the internal glue to warm up to 150F means the external temps would be much, much higher, thereby possibly damaging the finish or causing the joints on the frame to let go as well. While you are welcome to try it, we have not tested this and would not recommend this method to

cabinetjoint.com/video-library/removing-front-frame-assembled-cabinet/

View More ...

Separating Stacked Wall Cabinets

Ralenda Broerman says: Question. On the upper tier of stacked cabinets , must the uppers match the on the door openings and trim. I have my top cabinets in and still have 24 inches to the ceiling. Should i make custom cabinets , so they match, or can I just get close and use a different door ( bottoms are fancy shaker, and could I use a simple

cabinetjoint.com/video-library/separating-stacked-wall-cabinets/

View More ...

Hanging Doors on Lazy Susan Pie Cut Cabinet (BLS/WCP

Contact Us. Cabinet Joint Phone: 888-211-6482 Fax: 704-662-8898 Email: [email protected] Contact Us

cabinetjoint.com/video-library/hanging-doors-lazy-susan-pie-cut-cabinet-blswcp/

View More ...

Flush End vs Exposed End: What is the

The Flush end is preferred over the exposed end for a couple of reasons. First off, it makes for a more furniture-like product and really adds little expense over the exposed end option – perhaps a few dollars per side. Secondly, the flush end option is ideal to allow extra clearance on full overlay cabinets. How so?

cabinetjoint.com/2013/10/conestoga-rta-cabinet-flush-end-vs-exposed-end-whats-difference/

View More ...

Home Office & Media Cabinets

CABINET CODE: DB_BD (CSDB will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized) SIZES: Width: 24-36″ in 1/16″ increments Height: 29.5″ only Depth: 18, 21 and 24″ – 24″ is standard. TO ORDER: Indicate DB + width + height (29.5 only) + BD. IE: DB3029.4BD for a 30″ wide cabinet with Butt Doors.

cabinetjoint.com/rta-cabinets/home-office-media-cabinets/

View More ...

Solid Valances (Various Designs)

Solid Valances (Various Designs) Each valance is 6″ high and available in any wood. Straight valance standard with machine edge, but available with any edge profile. Specify which sides receive profile. Roman Arch valance and Traditional Arch valance comes standard with machine edge. Valances available with a variety of edge profiles; contact

cabinetjoint.com/cabinet-accessories-refacing/solid-valances-various-designs/

View More ...

Base Lazy Susan When Used in Inset Applications

Since installing an inset susan hinge is exactly the same as a standard inset hinge (it uses the same bracket), there is no real need for a separate video. Here is the video link for the inset bracket install and also the soss hinge install. Between these videos, you have what you need to install the inset hinges.

cabinetjoint.com/video-library/base-lazy-susan-used-inset-applications/

View More ...

Finish Samples Archive

ain and warm color. Almost any finish looks great on cherry as it takes stain evenly. Cherry is known for mid and darker tones, but lighter stain colors also look fantastic on Cherry. Be aware that Cherry will darken over time due to the affects of UV light. As a rule of thumb, any mid tone stain or darker will mask this affect, but if ordering

cabinetjoint.com/finishes/

View More ...

Refrigerator Tall Cabinet (RTB) Assembly

Also, on the fridge top cabinet, we would need the exact cabinet size you need (width, height and depth). We cannot derive the cabinet size for you from the fridge size as we dont know or have access to the other variables (ceiling height, adjacent cabinet height, etc). Once we see the quote request come through, we can certainly process the

cabinetjoint.com/video-library/refrigerator-tall-cabinet-rtb-assembly/

View More ...

How to Install Sink Divider Panel in Vanity RTA Cabinet

The alternate, and perhaps assumed, installation method would be to forego the ‘L’ brackets altogether. As shown in this video, you can attach the drawer glide directly to the cabinet (or divider) side, and/or if the cabinet configuration requires the divider panel to be justified to the other side of the face frame stile, you could simply

cabinetjoint.com/video-library/installing-sink-divider-panels-vanity-combo-cabinets-optional-step/

View More ...

Cabinet Specifications

General Sizing Specifications. Wall cabinets are generally 12.5″ deep (this is non standard as most companies offer 12″ deep as standard). Base cabinets are generally 24″ deep. Obviously, some models of wall or base cabinets will differ from these, but this will be called out for that cabinet in the catalog as well as on your quote.

cabinetjoint.com/cabinet-specifications/

View More ...

Criss Cross Wine Rack

Criss Cross Wine Rack. 3 Profiles available: Square, Deluxe or Standard. profiles below. Sold individually (specify two pieces if pair is desired). Red oak, Hard Maple, Cherry only. Trimmable in length and width. Standard openings are 4″ x 4″. Square and Deluxe openings are 4-1/4″ x 4-1/4″. Square and Deluxe wine racks can be used to

cabinetjoint.com/cabinet-accessories-refacing/criss-cross-wine-rack/

View More ...

Standard Raised Panel Valance

Standard Raised Panel Valance. A more affordable option than our custom valance options because we use specific increments. Available in 3″ increments from 30″ to 72″ only. 12.5″ High minimum. Framing widths are 2-3/4″ stiles, 2-5/16″ rails and 2-1/2″ upright mid rail. Arch height (distance from narrowest point to widest point) is

cabinetjoint.com/cabinet-accessories-refacing/standard-raised-panel-valance/

View More ...

ADS